say yes to large projects
CrystalBlast Navigator is a pass-through unit designed to permit smart part navigation through the unit using “Hopper-Less” machine technology. The Navigator uses new technology to lower the operating height of the machine track, creating a larger sandcarving area.
The Navigator allows for a more accommodating process area by engineering the part conveyor track to raise and lower, keeping the sandcarving area centered. The Navigator comes standard with an 8’ track section but available with optional tracks lengths.
The Navigator is a complete system consisting of the cabinet with air-swept floor section, pneumatic abrasive conveyor, cyclone separator reclaimer with attached abrasive storage hopper with a 50 pound ASME Coded pressure pot with access port. In addition the system also includes the standard 8’ part roller conveyor track, flexible abrasive and dust collector ducts and all required blast controls. The attached dust collector consists of 440 square feet of cartridge filter dust collector with 1100 cfm exhaust blower and exhaust silencer.
- 14 gauge CRS construction
- Panel cabinet for pass through part processing
- Part velocity slots
- Pneumatic conveyor with high efficiency cyclone reclaimer
- ASME Coded 50 lb capacity pressure generator w/Cleanout Port
- Cabinet lighting with rear wall back lighting
- Large 10″ diameter access ports, gloves attached
- Stabililty legs
- Inside pop-up perforated work gate
| Dimensions | Abrasive Conveyor | Pneumatic Conveyor Assembly | |
| Overvall: | 96”W x 48”D x 68”H | Hoses | Abrasive & Dust Collector Hoses included, 3/8” OD micro abrasive |
| Working: | 72”W x 24”D x 48”H | Lighting | Inside fluorescent |
| Door Opening: | 30”W x 18”H | Electrical | 230V/60Hz/1Ph |
| Air Requirements (compressor not included) 3/32” Nozzle: 5.7 cfm @ 30 psi 1/8” Nozzle: 8.4 cfm @ 30 psi | Approximate Shipping Weight | 1,800 lbs | |
| Separator | Cyclone type 0-240 mesh | ||
| Dust Collector | 1100 cfm exhaust blower with silencer — 440 sq.ft. certified filter cartridge w/ pneumatic cleaning cycle | ||
For a side-by-side comparison of CrystalBlast Navigator and other CrystalBlast models visit the support section.
This product has no reviews. Be the first to review the CRYSTALBLAST Navigator. Send your review to info@ikonicsimaging.com
Order it today.
The entire line of CrystalBlast Sandcarving Equipment is available online at:
For customer service call:
Our representatives are available Mon-Fri, 8am – 5pm CST.
Online Support
Product literature, instructional videos, FAQ’s and more, all in one convenient location.
Go to support homeRequest Information
Complete System with Mask Making Package
- Letralite Exposure Unit
- RapidMask® HD – 10 sheets (ideal for halftones)
- RapidMask® HT – 10 sheets
- AccuArt Inkjet Film – 10 sheets
- Positive FX Laser Film – 10 sheets
- RapidMask® Test Kit
- RapidMask® DVD
- Mask-Off Tape – 2″ x 300′
The RapidMask® Dry Processing System allows photo resist stencil production in minutes. Begin by generating artwork with AccuArt Water Resistant Inkjet Film. Create positives or negatives using a computer and a standard inkjet printer. Next, expose the printed artwork to RapidMask® Photo Resist Film using the Letralite UV Exposure Unit. This compact unit provides an 11″ x 14″ imaging area that exposes photo resist film quickly and uniformly. Finally, apply the RapidMask® stencil to substrate and sandcarve.
Add this package to any Sandcarver System of your choice and save hundreds of dollars. This special package offers top-of-the-line products and equipment. No other company offers a dryprocessable self-adhering film, AccuArt Water Resistant Inkjet Film for creating positives or negatives, and uniquely designed equipment specially made for the decorative sandcarving industry.
